SAM-ESV7 Chip Library  Version 2.0
Create Projects for SAM-E7x, SAM-S7x, and SAM-V7x devices series with SAM-ESV7 Chip Library
 All Files Pages
Introduction

This manual explains how to create projects that utilize the Chip Library of the Atmel Software Package for SAM-E7x, SAM-S7x, and SAM-V7x device series together with Keil MDK Version 5, which provides Device Family Packs (DFP) for the above mentioned device series.

The following MDK Software Packs for Atmel Cortex-M7 devices are available:

Software Pack Description
Keil:SAM-E_DFP Device Family Pack for Atmel SAM-E7x device series.
Keil:SAM-S_DFP Device Family Pack for Atmel SAM-S7x device series.
Keil:SAM-V_DFP Device Family Pack for Atmel SAM-V7x device series.
Keil.SAM-ESV7_SFP Software Foundation Pack for SAM-E7x, SAM-S7x, and SAM-V7x device series. It requires the installation of the related device family packs (version 2.x or higher). Includes the SAM-ESV7 Chip Library, SAM-ESV7 Framework (API), and a full set of CMSIS-Driver that provide standardized peripheral interfaces. This version of the SFP is based on version 1.4 of the Atmel Software Package.
  • CMSIS-Driver: extends the SAM-ESV7 Chip Library with standardized drivers for middleware and generic component interfaces.
  • Middleware Examples: demonstrate the features of the MDK Professional Middleware.

The diagram below is an overview of the complete software stack that is available with Keil MDK Version 5.

AtmelChipLib_Overview.png

Refer to MDK Version 5 - CMSIS and the CMSIS Workshop for additional information.

This manual contains the chapters:

This manual assumes that you are familiar with MDK. Refer to MDK Version 5 - Getting Started for additional information.


Revision History

Version Description
V1.0 Initial release for Atmel SAM-ESV7 Chip Library